GX -100℃~-30℃

Upright industrial refrigerator or horizontal industrial refrigerator

industrial refrigerators Products

Cooling Power @-90℃0.7kW~3kW
Power range9kW~30kW
Storage Capacity280l~1600L
Temperature fluctuation±2℃
RefrigerantR404A/R23
Weight470KG~940KG
Place of OriginChina

industrial refrigerator

INQUIRY

Parameters Detailed

If the low temperature refrigeration system has been frosted, believing that some enterprises have met, then how should we deal with such situation? Are there any methods can solve this problem. Today, let’s know something about it with Guanya refrigeration company.

1. First turn off the suction valve of the low temperature box compressor and unload to the minimum number of cylinders to operate.

2. Then close the liquid supply valve of the intermediate cooler and close the suction valve of the small high pressure cylinder.

3. After the high pressure cylinder is returned to normal, open the suction valve of the large and low pressure cylinder again. When the normal operation has been resumed, then supply the liquid to the intermediate cooler.

4. If the frosting of high pressure cylinder is severe, the operation of the unit must be stopped.

5. Drain the intermediate cooler.

6. The cooling water treatment is the same as the single-stage treatment.

Do you remember the above way of processing? If you still have some questions, please contact the customer service on the official website of Guanya refrigeration company immediately, and solve the problem in time!

Click online message to inquire about product details

Send us a message and we will contact you as soon as possible

Configuration Details

Model	GX-A028N	GX-A050N	GX-A0A10N	GY-A028N	GY-A050N	GY-A080N	GY-A0A16N
Volume	280L	500L	1000L	280L	500L	800L	1600L
Inner dimension	610600 760	800735 850	10001000 1000	800600 600	1200650 650	1350800 750	2000900 900
Type	（Vertical）			（Chest/Horizontal）
Capability carrying	150KG	220KG	300KG	150KG	220KG	300KG	650KG
Capability carrying	Designed bearing capacity is two times of the standard one, (refrigeration system is designed according to the standard capacity when target artifact weight is greater than the standard capacity, the cooling rate will decrease)
Temp. range	-100℃～60℃	-100℃～60℃	-100℃～60℃	-100℃～60℃	-100℃～60℃	-100℃～60℃	-100℃～60℃
Cooling capacity at -90℃	0.7kw	1 kw	2 kw	0.7kw	1 kw	2 kw	3kw
Temp. accuracy	±2℃	±2℃	±2℃	±2℃	±2℃	±2℃	±2℃
Heating power	2kw	3kw	5kw	2kw	3kw	5kw	8kw
Heating power	Nickel-chromium alloy electric heating heater, the controller has double safety protection, with independent temperature limiter protection.
Cooling rate	(Ambient temperature of 25℃, no-load, from 60 ℃s to -95 ℃ about 1 hour).；cooling rate will be a little different for temperature changes.
Controller	PLC multifunctional controller
Operation panel	7-inch color touch screen, display set temperature, measured temperature.
Temp. record	Temperature curve and fault record, U-disk data export, excel format.
Inside circulating air	1650 m³/h	2100 m³/h	2750 m³/h	2100 m³/h	2750 m³/h	3500 m³/h	6000 m³/h
Inside circulating air	When it is open, the internal circulation fan automatically turns off. The touch screen displays open state.
Compressor	Emerson Copeland, adopt cascade refrigeration technology
Intermediate heat exchanger	Plate heat exchanger
Dry filter	Emerson
Expansion valve	Electronic expansion valve
Evaporator	Copper-tube with aluminum-fin
Cooling Type	Air-cooled with water-cooled auxiliary functions (Ensure good cooling capacity when temp. above 30℃)
Means of insulation	Polyurethane foam insulation, thermal insulation layer 125 mm, with embedded FIR boards
Safety Protection	Self-diagnosis function; Phase sequence phase failure protection; leakage protector; cooling unit overload protection; high and low pressure switch, overload relay, thermal protection device, high temperature protection and temperature fault protection.
Case material	Outside is cold rolled steel painting, internal is SUS304 wire drawing board.
Refrigerant	R404A/R23/R14
Dimension	11501150 1850	13501300 1850	15501500 2100	22001150 1150	27001200 1200	29001300 1250	37001400 1350
Power 380V 50HZ	9KW MAX	13.5KW MAX	18KW MAX	12KW MAX	16.5KW MAX	20KW MAX	30KW MAX
Weight	470kg	580kg	750kg	495kg	625kg	810kg	940kg
Optional	High temperature reaches 150℃ and temperature accuracy is ±0.5℃；the input power will be changed （When select this model, the thickness of thermal insulation layer will be 150mm，thermal insulation material will be silicate and vacuum plate）
Optional	Temp. accuracy ±0.5℃
Optional	Cooling and heating program controlled, meet cold treatment process requirements(can set 5 programs, each program can edit 40 steps.)
Optional	Interior door, reduce cooling capacity lost when picking small workpieces (temperature below 60℃ optional)
Optional	Outside SUS304 wire drawing board case
Optional	Diameter 50mm cable hole
Optional	Electric heating vacuum glass observation window (with lighting) 200mm*300mm
Optional	Low temperature automatic defrost (can be once per hour or use manual button to defrost), ensure it can work at low temperature for long time even the door is open and close frequently）

Working Principle

Applications

It is used in industrial cold treatment, mainly in the application of cold work mold steel, high-speed steel, bearing steel, cold work molds and mold accessories;

This industrial cold treatment box can significantly increase the hardness and strength of the workpiece, ensure the dimensional accuracy of the workpiece, improve the wear resistance and impact toughness of the workpiece, and improve the stress distribution within the workpiece;

Mainly used for cold shrinkage of copper sleeves, bearings, etc., and widely used in precision machinery assembly;

It is also widely used in ultra-low temperature testing of large equipment (automobiles, large engineering machinery, aircraft components, aerospace equipment components, military equipment components);