How to avoid burning out of chiller industrial compressors?

　　How to avoid burning out of chiller industrial compressors?

　　1. The reason for the burnout of the industrial chiller compressor may be due to a lack of phase in the power supply. Check if one or both phases of the winding have turned black and confirm if the coil is damaged;

　　2. The reason for the burnout of the industrial chiller compressor may be that the contactors and contact points in the circuit are not closed, and the connection points of the wires are loose;

　　3. The reason for the burning of the compressor in the industrial chiller unit may be due to motor overload, excessive current and overheating during prolonged operation of the motor;

　　4. The reason for the burnout of the industrial chiller compressor may be due to frequent start-up and braking of the chiller.

　　Routine testing:

　　During the use of industrial chillers, it is necessary to always pay attention to the issue of compressor operating noise. If there is a significant increase in noise, based on the experience introduced by the factory, it is necessary to timely and effectively complete the shutdown inspection, and on the basis of ensuring normal operation, complete the maintenance work of the industrial cooler compressor.

　　Attention: Once the compressor makes noise, it is necessary to be vigilant. Often, small problems can also cause complex and serious faults in the later stage, such as compressor liquid hammer.

　　Pay attention to the pressure gauge:

　　During use, it is necessary to pay attention to the specific values of the pressure gauge of the industrial chiller at any time. If there is a large range of abnormal situations, it is necessary to carefully check. The specific inspection method can be based on the relevant methods introduced by domestic industrial chiller manufacturers, and all inspection processes can be completed to avoid pressure problems affecting the specific working efficiency of the industrial chiller compressor and causing an increase in electricity consumption, Improve the energy consumption of industrial chillers. Attention: The pressure gauge of the chiller includes high-pressure pressure gauge, low-pressure pressure gauge, etc.

　　Measurement of operating temperature:

　　During the operation of industrial chillers, it is necessary to measure the specific operating temperature of the industrial chiller compressor by hand or equipment at any time. If the temperature is too high, it means that the industrial chiller is in an overloaded operating state. At this time, it is necessary to measure the current and voltage to achieve fault detection and ensure that the industrial chiller compressor is in an absolutely safe operating state and reaches the appropriate operating temperature, Complete the entire operation process.

　　Attention: If the temperature of the compressor is too high, it may also be due to low fluorine content, low compressor power, long capillary tubes, poor condensation effect, temperature control failure, and compressor oil shortage, which poses great harm. Special attention should be paid.